STATISTICS SHEET FOR FOX600


Meets ASTM C 518 and ISO 8301 standards

Specimen size 610mm (24") square and 0 to 203mm (8")thick

  • Microprocessor based - stand alone operation (no PC needed)
  • Solid state, state of the art electronic heating/cooling
  • Electronic control and resolution of 0.6 mV
  • Temperature range : -15°C (5°F) to 80°C (176°F) on both plates - heat flow up or down
  • Temperature control and resolution of 0.01°C
  • Dual zone heating/cooling to prevent edge heat loss
  • Four inches insulation around test chamber
  • Instrument dimensions : 32"W by24"H by 32" D (801mmW by 610mmH by 801mmD)
  • Weight 220lb. (100kg)
  • Input power: 115V or 220V / 50/60Hz / user switchable at 1000VA
  • Thirty day money back guarantee
  • Warranty - one full year parts and labor

TESTING

  • Accuracy of better than 1%, 0.2% Repeatability, 0.5% Reproducibility
  • Ease of use enables initiation of test in less than a minute
  • Respond to prompts on four line alphanumeric LCD display
  • Testing times of less than 20 minutes per setpoint for 1" sample
  • Repeated testing of one setpoint or entry of up to nine setpoints
  • Plate spacing precision of 0.001"
  • Auto readout of plate spacing, or user set-able (compressible specimen)
  • Print out through standard RS 232 interface


OPTIONS

WinTherm Software

  • Allows connection of FOX instruments to IBM compatible computer thru RS 232 interface
  • Provides total control of instrument
  • Ability to change test parameters (temperatures, equilibrium criteria, PID), during test
  • Ability to run two FOX instruments simultaneously on one host
  • Capacity to run as many as 8 FOX instruments simultaneously
  • Ability to use computer for other tasks while testing if still in Windows



Product Lines

© 1996-2003 LaserComp, Inc.